Enjoy your favorite playlist while you are hard at work. Low battery on your phone? No problem, place your phone on the Power Pad and fully recharge. The built-in LED clock display and alarm function will make sure you meet your deadlines and stay punctual.
Bluetooth wireless allows straightforward wireless pairing of Bluetooth enabled devices
Supports Bluetooth v5.0
Wireless inductive charging for mobile devices
FM scan radio
Built-in full range speaker, 2.24 inch, 4 ohm, 5W
Handsfree speakerphone
Digital clock
Supports Micro SD card up to 32GB
Micro-USB port for battery recharge & DC power input
Bluetooth range: 60 feet
Built-in microphone
Aux in (3.5mm audio input)
Micro SD card slot: supports audio file playback
White LED display shows time, radio frequency, function & low battery, 1.57 x 0.71 in. size
Single alarm - a simple alarm to start your day
Charging distance: 5-7mm
DC battery power: built-in rechargeable lithium ion battery
DC battery power: 1200 mAH battery
Charge time: 4 hours
Battery life: ~10 hours at 50% volume
Battery life: ~5 hours at 100% volume
DC power input: requires an AC/DC power adapter (included)
Dimensions: 5.98 x 3.07 x 3.31
WHAT IS THE PLAY TIME OF THIS UNIT WITH ONE FULL CHARGE?
Battery life/ play time: ~10 hours at 50% volume
DOES THIS UNIT HAS WIRELESS CHARGING?
Yes, to wirelessly charge your phone place your device onto the Power Pad located on top of the clock radio as shown below. Note: The unit must be connected to the DC power adapter and a standard wall outlet for wireless charging to work.
HOW CAN I SET THE CLOCK?
Setting the Clock
Make sure to change the clock to Standby Mode by pressing the Power button.
Press the Power button to change to Standby Mode.
Press and hold the Play/Pause/Mode button until the display starts to blink, the clock is now in alarm set mode. You will need to Press and hold Play/Pause/Mode button again until the hour indicator blinks signifying you are in clock set mode. Use the Volume Wheel to select the desired hour. (Note: When in PM the PM indicator will light up. When in AM the PM indicator will turn off ).
Once you have selected the correct hour, press the Play/Pause/Mode button to confirm. You may now adjust the minutes. Use the Volume Wheel to adjust the minutes to the desired time.
Once you have selected the desired minute, press the Play/Pause/Mode button to finish setting the time.